XUZHOU XINDA SLEWING BEARING CO., LTD Slewing Bearing Selection Email: bearing@slewing-world.com |
||||||||||||||
Company: | Add.: | |||||||||||||
Title: | Dept.: | |||||||||||||
Tel: | Fax: | |||||||||||||
Application: |
Axis of rotation |
Mounting type |
||||||||||||
|
Horizontal □ Vertical □ |
Horizontal□ Vertical □ | ||||||||||||
Gear type: |
Movement: |
No. of revolutions (RPM): | ||||||||||||
External □ |
positioning only□ |
Normal: | ||||||||||||
Internal □ |
intermittent rotation □ |
Max: | ||||||||||||
Without □ |
continuous rotation □ |
|||||||||||||
Load data |
||||||||||||||
Bearing load Loading type |
A |
B |
C |
|||||||||||
max. working load |
max. test load e.g. 25% overload condition |
Extreme load e.g. shocks or out of operation |
||||||||||||
Axial loadsparallel to axis of rotation |
|
KN |
||||||||||||
Radial loadsat right angle to axis of rotation (without gear loads) |
|
KN |
||||||||||||
Tilting moment generated by axial load |
|
KN.m |
||||||||||||
Tilting moment generated by radial load |
|
KN.m |
||||||||||||
Final tilting moment |
|
KN.m |
||||||||||||
Tangential force per drive [kN] Normal: Max: | No. of drives: Position: ° apart |
|||||||||||||
Slewing bearing type and dimension |
||||||||||||||
Type: light type□ single row ball □ double row ball□ single row cross roller□ triple row cross roller□ | ||||||||||||||
Dimension: OD : mm □ ID: mm □ Height: mm □ | ||||||||||||||
For continuous rotation, variable and life requirements, please complete annex A. | ||||||||||||||
Annex A is enclosed: | ||||||||||||||
Remarks: (e.g. special working conditions / temperatures, required accuracies, bearing dimensions, inspection- or certification requirements, material tests etc.) | ||||||||||||||
Appendix A The percentage of working time and rotation speed under different load cases. |
||||||||||||||
Slewing Ring Load Data |
||||||||||||||
Load cases |
axial |
radial |
Moment |
rotation speed |
time |
|||||||||
1 | ||||||||||||||
2 | ||||||||||||||
3 | ||||||||||||||
4 | ||||||||||||||
5 | ||||||||||||||
6 | ||||||||||||||
7 | ||||||||||||||
8 | ||||||||||||||
9 | ||||||||||||||
10 | ||||||||||||||
Continuous operation: | ||||||||||||||
The service life(L10) : at average speed: rpm, service life is at least: /hour | ||||||||||||||
Intermittent operation: | ||||||||||||||
Working life needed: at angle+/- °, the least recycle number: | ||||||||||||||
Appendix B |
||||||||||||||
Gear data |
||||||||||||||
External gear □ Internal gear □ Involute gear □ | ||||||||||||||
Gear data | ||||||||||||||
Definition |
Slewing ring |
pinion |
||||||||||||
Module m |
|
|
||||||||||||
Number of teeth z |
|
|
||||||||||||
Pressure angle α |
|
|
||||||||||||
Helix angle β |
|
|
||||||||||||
Modification coefficient x |
|
|
||||||||||||
Coefficient of top clearance C |
|
|
||||||||||||
Gear width b |
|
|
||||||||||||
Precision grade |
|
|
||||||||||||
Gear center distance is adjustable | yes □ no □ |